Sea Dog Marine Hardware
Sea Dog makes a wide range of boat hardware and fittings, from anchor line to fishing tables. Parts are listed with the Sea Dog part number.
Sizing anchor line and hardware
A common rule is 1/8" of line diameter for every 9 ft of boat length, and enough length for a scope of about 7 to 1 in the depth you anchor in. Swivels and chain stoppers are sized by chain diameter, so check the chain before ordering. More: deck hardware, anchoring and docking, Lewmar windlasses and anchors and boat fishing accessories.
Twisted or braided anchor line?
Three-strand twisted nylon stretches to absorb shock and is easy to splice, which is why it is the usual choice for anchor rode. The lines listed here are twisted nylon.
What does a chain stopper do?
It takes the load of the anchor chain off the windlass once the anchor is set or stowed.
Rail mount or rod holder mount fillet table?
Rail mount clamps to a rail; rod holder mount drops into a flush rod holder. Choose whichever your boat has in a convenient spot.
How big are Sea Dog fillet tables?
The rod holder mount tables are 20" wide by 12-5/8" deep in medium (326510-3) and 30" wide by 12-5/8" deep in large (326515-3). The large size also comes as a rail mount table (326525-3).
Which Sea Dog flush mount rod holder: 90 degree or 30 degree?
The 325233-1 holds the rod at 90 degrees and takes rods up to 1-5/8" in diameter. The 325235-1 is angled at 30 degrees and takes rods up to 1-1/2". Both are investment cast 316 stainless steel with a cap.
Which Sea Dog deck fill do I need?
Match the fill to the tank and the hose. The cast 316 stainless steel hose deck fills for 1-1/2" hose come marked for diesel (351321-1) or waste (351323-1). Their slotted cap needs a deck fill key to open and close.
See every brand we carry
