On a full charge, the FlashFish 200W runs a 10W LED light for about 12 hours, a 40W fan for about 3 hours and a 65W laptop for about 2 hours. It runs a 30W CPAP for about 4 hours, which is not a full night. Those numbers assume the 151Wh battery FlashFish lists for its 200W model.
How to work it out
We assume about 85% of the rated capacity is usable, because of inverter and conversion losses: 151Wh x 0.85 = about 128Wh. Divide that by the device's draw in watts to get hours.
| Device | Typical draw | Runtime |
|---|---|---|
| Phone charge | about 15Wh per charge | about 8 charges |
| LED camp light | 10W | about 12.8 hours |
| CPAP, no humidifier | 30W | about 4.3 hours |
| Box fan | 40W | about 3.2 hours |
| 32-inch TV | 50W | about 2.5 hours |
| Laptop | 65W | about 2 hours |
The typical draws above are examples. Your device's label or a plug-in watt meter gives the real number. Anything over 200W, such as a kettle, a hair dryer or a microwave, will trip the station no matter how charged it is.
Getting more time
- Use the DC or USB ports where you can. They skip the inverter, so less energy is lost.
- Recharge during the day with the included 60W panel. A sunny day can add roughly one full charge.
- For a CPAP, turn the humidifier off. For a full night, see how big a battery you need to run a CPAP overnight.
If these runtimes are too short for your trip, compare larger portable power stations. The FlashFish 200W bundle is best for small devices.
