You can charge the FlashFish 200W power station three ways: from the included 60W solar panel, from a car's 12V socket, or from a wall outlet with the supplied adapter. Solar is the free option at camp. The wall is the fastest and most reliable before you leave home.
1. Wall outlet
Plug the AC adapter into a household outlet and into the station's DC input. Charge it fully before a trip so you start with a full battery. Many small stations take most of a day to fill from the wall, so start the night before.
2. Solar panel
- Unfold the 60W panel and face it toward the sun. Tilt it so it is roughly square to the sun, and move it as the shadows shift.
- Connect the panel's output cable to the station's DC input.
- Check the display to confirm the station shows it is charging.
Expect less than 60W in real conditions. A fair estimate is 60W x peak sun hours x 0.7. Four peak sun hours gives about 170Wh, which is roughly one full charge. Clouds, heat and shade cut that sharply. Bring the panel in when it rains and overnight.
3. Car 12V socket
Use the car charging cable while the engine is running. Charging with the engine off can drain the starting battery. Car charging is slow, but a few hours of driving between campsites puts meaningful charge back in.
Tips
- Store it at about 50 to 80% charge if you won't use it for a while, and top it up every few months.
- Don't charge it below freezing or in a hot closed car.
- Check that the station accepts charging while it is powering devices before you rely on pass-through use. Not all small stations support it.
Shop the FlashFish 200W with 60W solar panel, or browse solar generators for larger panel-and-station bundles.
