Victron's default lithium preset on the SmartSolar MPPT is 14.2V absorption for 2 hours and 13.2V float on a 12V system, which scales to 28.4V / 26...
For most travel trailers that dry camp a few nights, the LiTime 12V 200Ah Bluetooth: 2,560Wh in one case with a low-temperature cut-off. If you als...
LiTime makes its 12V 100Ah in three case sizes, so match the battery to the box: the Group 24 Bluetooth for a Group 24 tray, the Group 27 Bluetooth...
Yes. LiTime says the 12V 100Ah Xtra-Mini can be installed front, side or bottom down, which is unusual for a lithium battery and is the reason to c...
LiHeat batteries have two heating modes. With a charger connected they warm themselves automatically before taking a charge, and without one they c...
That is how LiTime ships them. LiTime's instructions say to connect a charger to turn the battery on at first use or after it has been powered off ...
Usually the charging source needs a lithium profile. LiTime recommends a 14.6V charger sized to the battery: 20A for its 100Ah Group 24 and Group 2...
Yes. LiTime rates its 12V house batteries for up to four in parallel and four in series (4P4S), using identical batteries. The 24V 100Ah models all...
No. LiTime states the 48V (51.2V) 100Ah ComFlex needs no shunt in a Victron system: it reports 25+ battery data points to the Victron display, VRM ...
It can, if you set it to its 20A mode. The LiTime 12V 40A DC-DC charger has selectable 20A or 40A output, and a factory 7-pin charge line is not bu...
Your cart may be empty now, but let us help you fill it up with amazing products.
