Victron Centaur, Phoenix or Skylla IP65 charger: which one charges my RV batteries?
All three are mains-powered battery chargers for bigger 12V and 24V systems. They split on three things: how many batteries they feed, how many amps they make, and where they can be mounted.
The three at a glance
| Centaur | Phoenix Charger | Skylla IP65 | |
|---|---|---|---|
| 12V models | 20, 30, 40, 50, 60, 80, 100A | 50A | 70A |
| 24V models | 16, 30, 40, 60A | 16, 25A | 35A |
| Outputs | 3, all full current | 2 full current + 1 x 4A | 1+1 or 3, by model |
| Input | 90-265VAC 45-65Hz or 90-400VDC | 90-265VAC 45-65Hz or 90-400VDC | 120/240V AC |
| Enclosure | Standard | Standard | Sealed IP65 (moisture and dust) |
Decision rule
- House bank plus a starter battery: Phoenix 12/50. The 4A output keeps the starter topped up while the two full-current outputs serve the house side.
- Two or three house banks that each need full charge current, or a big 12V bank: Centaur. It is the only one of the three that goes to 80A and 100A at 12V.
- Charger has to live in an engine bay, open storage bay or anywhere it can get wet: Skylla IP65.
How fast will it recharge?
Recharge time is roughly the amp-hours you used divided by the charger's amps (ignoring the slower top-off stage). Using the calculator's 85% usable for a 12V LiFePO4 bank:
| Bank (12V) | Usable Ah | 30A | 50A | 70A | 100A |
|---|---|---|---|---|---|
| 200Ah | 170 | 5.7 h | 3.4 h | 2.4 h | 1.7 h |
| 300Ah | 255 | 8.5 h | 5.1 h | 3.6 h | 2.6 h |
| 400Ah | 340 | 11.3 h | 6.8 h | 4.9 h | 3.4 h |
Check two limits before going big: your battery's maximum charge current, and your shore or generator supply. A large charger on a 30A pedestal shares that supply with everything else in the rig.
Lithium?
These listings do not state lithium charge profiles for each model. If you are replacing a factory converter for a lithium bank, read our answer on which Victron charger replaces a WFCO converter, or send us your battery model and we will confirm the setting before you order.



