Comparison
|
MPPT
|
RV Power
|
Solar
|
Victron Energy
November 12, 2026

Victron SmartSolar vs BlueSolar MPPT: What's the Difference?

SmartSolar and BlueSolar MPPTs share the same tracking, efficiency and charge algorithm. The difference is built-in Bluetooth: SmartSolar has it, BlueSolar needs a dongle or a GX device to talk to you.

Victron SmartSolar MPPT solar charge controller

Victron sells two lines of small MPPT solar charge controllers that look almost identical: SmartSolar (blue case) and BlueSolar (also blue, same size). Inside, they share the same tracking and charging. The difference is how they talk to you.

Quick answer

  • SmartSolar has Bluetooth built in. You open the VictronConnect app on your phone and see solar watts, battery voltage, charge state and history, and change settings, with nothing else to buy.
  • BlueSolar has no Bluetooth. Its only data connection is a VE.Direct port. To see it in the app you add a VE.Direct Bluetooth Smart dongle, or you connect it to a GX device such as a Cerbo GX.

For most RV owners, SmartSolar is the better buy. The price difference is small and you can check and adjust the controller from inside the rig.

What's the same

According to Victron's manuals for the 75/10 to 100/20 models, both lines share:

  • Efficiency: peak efficiency of 98%.
  • Charge algorithm: multi-stage adaptive (bulk, absorption, float) or user-defined, with presets for lithium, AGM, gel and flooded batteries.
  • Specs: the same battery current, PV voltage limits and nominal PV power for each size. A 100/20, for example, handles up to 100V open-circuit panel voltage and 20A of charge current, about 290W of panels on a 12V battery.
  • VE.Direct port: both have one, so both can report to a Cerbo GX and the VRM portal.
  • Load output: the small models (75/10 to 100/20) have a short-circuit-proof load output for a light or fan circuit, with low-voltage disconnect.

What's different

SmartSolar BlueSolar
Built-in Bluetooth Yes No
VictronConnect app Direct from your phone Needs a VE.Direct Bluetooth Smart dongle
VE.Smart Network (share battery voltage, temperature and current with other Victron devices) Yes Only with the dongle fitted
VE.Direct port Yes Yes
Monitoring through a GX device and VRM Yes Yes

VE.Smart Network matters more than it sounds. With a SmartShunt on the same network, the MPPT charges to the voltage measured at the battery rather than at its own terminals, and several chargers can work from the same readings. Victron's manuals say a VE.Smart Network needs a controller with Bluetooth, either built in or from a dongle.

Sizes and prices at RV Parts Giant

Size SmartSolar BlueSolar
75/10 $65.45 $47.60
75/15 $70.55 $52.70
100/15 $82.45 $64.60
100/20 $93.50 $76.50
100/30 $135.15 $118.15
100/50 $193.80 $176.80

Prices at the time of writing; check the product pages for current prices. The first number in each size is the maximum panel open-circuit voltage, the second is the maximum charge current in amps. To pick a size, see Step 4 of our Victron off-grid system design guide.

Which should you buy?

  • Choose SmartSolar if the controller will be the only Victron device that reports to you, if you want to adjust settings from your phone, or if you plan to pair it with a SmartShunt or Orion XS over VE.Smart. That's most RVs and vans.
  • Choose BlueSolar if you already have, or are buying, a Cerbo GX and will wire every controller to it by VE.Direct cable. The GX gives you the monitoring, so built-in Bluetooth adds little. It also suits a simple trickle-charge setup you'll configure once and leave.

Either way, set the battery type in the controller to match your battery before the first charge. Lithium batteries need the lithium preset or the battery maker's voltages, not the default.

Shop the controllers

More reading: our SmartSolar MPPT review and Renogy Rover vs Victron SmartSolar.

Comparison
|
MPPT
|
RV Power
|
Solar
|
Victron Energy
Updated: November 12, 2026